/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define FC_TARGET_MCU STM32F7X2
#define BOARD_NAME BOTWINGF722
#define MANUFACTURER_ID BLDY
// ADC
#define ADC_CURR_PIN PC0
#define ADC_RSSI_PIN PC1
#define ADC_VBAT_PIN PC2
#define ADC1_DMA_OPT 0
#define ADC_INSTANCE ADC1
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_CURRENT_METER_SCALE 400
#define DEFAULT_VOLTAGE_METER_SCALE 110
// BARO
#define USE_BARO
#define USE_BARO_DPS310
#define BARO_I2C_INSTANCE I2CDEV_3
// BEEPER
#define BEEPER_INVERTED
#define BEEPER_PIN PB7
// DEBUG
#define SWDIO_PIN PA13
#define SWCLK_PIN PA14
// FLASH
#define USE_FLASH
#define USE_FLASH_W25Q128FV
#define SPI1_NSS_PIN PA4
#define SPI1_SCK_PIN PA5
#define SPI1_SDI_PIN PA6
#define SPI1_SDO_PIN PA7
#define FLASH_CS_PIN SPI1_NSS_PIN
#define FLASH_SPI_INSTANCE SPI1
#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
// I2C
#define I2C3_SCL_PIN PA8
#define I2C3_SDA_PIN PC9
// IMU
#define USE_ACC
#define USE_GYRO
#define USE_ACC_SPI_ICM42688P
#define USE_GYRO_SPI_ICM42688P
#define SPI3_NSS_PIN PD2
#define SPI3_SCK_PIN PC10
#define SPI3_SDI_PIN PC11
#define SPI3_SDO_PIN PC12
#define GYRO_1_EXTI_PIN PC13
#define GYRO_1_CS_PIN SPI3_NSS_PIN
#define GYRO_1_SPI_INSTANCE SPI3
// LED
#define LED_STRIP_PIN PB6
#define LED0_PIN PC4
#define LED1_PIN PB2
// MAG
#define MAG_I2C_INSTANCE I2CDEV_3
// MOTOR
#define MOTOR1_PIN PB4
#define MOTOR2_PIN PB5
#define MOTOR3_PIN PB0
#define MOTOR4_PIN PB1
#define SERVO1_PIN PA15
#define SERVO2_PIN PB3
// OSD
#define USE_MAX7456
#define SPI2_NSS_PIN PB12
#define SPI2_SCK_PIN PB13
#define SPI2_SDI_PIN PB14
#define SPI2_SDO_PIN PB15
#define MAX7456_SPI_CS_PIN SPI2_NSS_PIN
#define MAX7456_SPI_INSTANCE SPI2
// PINIO
#define PINIO1_PIN PC3
#define PINIO1_BOX 40
#define PINIO1_CONFIG 129
#define BOX_USER1_NAME "VTX PWR"
#define PINIO2_PIN PC14
#define PINIO2_BOX 41
// UART
#define UART1_TX_PIN PA9
#define UART1_RX_PIN PA10
#define UART2_TX_PIN PA2
#define UART2_RX_PIN PA3
#define UART3_TX_PIN PB10
#define UART3_RX_PIN PB11
#define UART4_TX_PIN PA0
#define UART4_RX_PIN PA1
#define UART6_TX_PIN PC6
#define UART6_RX_PIN PC7
#define RX_PPM_PIN PA3
#define SERIALRX_UART SERIAL_PORT_USART2
#define ESC_SENSOR_UART SERIAL_PORT_UART4
#define GPS_UART SERIAL_PORT_USART6
#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON
#define CAMERA_CONTROL_PIN PB8
// TIMER && DMA
#define TIMER_PIN_MAPPING TIMER_PIN_MAP(0, LED_STRIP_PIN, 1, 0) \
TIMER_PIN_MAP(1, MOTOR1_PIN, 1, 0) \
TIMER_PIN_MAP(2, MOTOR2_PIN, 1, 0) \
TIMER_PIN_MAP(3, MOTOR3_PIN, 2, 0) \
TIMER_PIN_MAP(4, MOTOR4_PIN, 2, 0) \
TIMER_PIN_MAP(5, SERVO1_PIN, 1, -1) \
TIMER_PIN_MAP(6, SERVO2_PIN, 1, -1) \
TIMER_PIN_MAP(9, RX_PPM_PIN, 3, -1) \
TIMER_PIN_MAP(10, CAMERA_CONTROL_PIN, 2, -1)